| Seller: |
admin |
| Feedback: |
There are currently no ratings. |
|
|
|
|
| Thunder Tiger is glad to introduce the newly designed Electric RC Helicopter – Raptor E550. The Raptor-E Series are based on a proven design the original Thunder Tiger Raptor Nitro Series. |
| |
Specification:
Full Length of fuselage: 1150mm (45.27")
Full width of fuselage: 140mm (5.51")
Total height: 390mm (15.35")
Main rotor dia: 1245mm (49")
Tail rotor dia: 237mm (9.33")
Gear ratio: 1:8.54~12.33:4.56
Full equipped weight: 3,300g ( 7.3 lbs) |
Raptor E550 is equipped with the same rotor head and tail drive system of Raptor 30 v2. Combined with a new frame design to adopt the electric power unit. E-CCPM (Electronic Cyclic/Collective Pitch Mixing) control system, reliable flying characteristic, with an optimized frame structure. The Raptor E550 is best entry-level electric helicopter for you to enjoy flying!
Features:
- Reliable Raptor 30 v2 rotor head and tail drive system
- Push-Pull linkage for control surface
- 90° E-CCPM control system (Optional – 140° E-CCPM)
- Aluminum lower side frame
- Easy installation of rear motor mounting system
- Incline battery installation brace
- Optimize gear ratio setting
- Upgradable to E620 SE
- New Design Raptor-E Decal Set
|
Accessories Needed:
- Radio Set - Transmitter (6 or more channels), Servo x4, Receiver, Battery, Switch Harness,
Gyro, Foam, Rubber Band.
- Propulsion System - Brushless Motor (No.2379 OBL 43/11-30 H), Speed Control (No.8043 ACE BLC-75),
Li-poly battery 5S~6S
- Rotor Blades Required - (Recommended) Carbon Fiber Graphite Rotor Blades - 550 mm » TTR3828
|
|