| Seller: |
admin |
| Feedback: |
There are currently no ratings. |
|
|
|
|
| Mr.Taya, the first F3C Helicopter World Champion, designed this helicopter to be the highest quality model helicopter in the RC hobby industry for modelers who love building and flying model helicopters. |
| |
Specification:
Full Length of fuselage: 1410mm (55.50")
Full width of fuselage: 190mm (7.50")
Total height: 465mm (18.25")
Main rotor dia: 1640mm (64.75")
Tail rotor dia: 260mm (10.25")
Gear ratio: 1:8.45:4.65
Full equipped weight: 4800g (10.5 lbs) |
Thunder Tiger has incorporated all the state-of-the-art technology into designing and making this helicopter. Which includes a Unique Sideframe System, Bell-Hiller Mixing Control Unit and a Shaft Drive Tail Rotor which has the same aluminum torque tube system as the Thunder Tiger/Taya Imperio helicopter. Using a modern Computer Aided Design to design and manufacture the Raptor 90. High Performance Thunder Tiger PRO-90H ring engine and muffler are recommended.
All the features that made "Raptor" a household word in the R/C helicopter world are incorporated in the 90 size version. Any pilot can really appreciate the pleasure of flying in 3-dimensional space. Its docile handling is ideally suited for begginers.The stable hover and agility also make it the top choice for contest fliers and extreme 3-D pilots.
Features:
- Raptor 90 SE comes complete with silver anodized aluminum tail pitch fork
for positive tail authority
- Rear carbon servo tray for direct tail response
- Metal grips
- Metal flybar control arm
- Carbon fiber collective pitch arm
- Metal upper/lower bearing block
- Cyclic ratio adjustment for smooth F3C or extreme 3-D
- Metal washout base for smooth solid collective inputs
- Metal elevator control arm
- Aluminum swash plate for enhanced control response
- Metal main rotor hub with button head
- Metal side frame stiffener
- Carbon base plate strengthens frame assembly
- Metal cooling fan
- Includes 11 and 12 tooth pinion gears
- Carbon graphite collective control arm set
- Carbon side frames both upper/lower
- Carbon tail fins vertical and horizontal
- Carbon tail drive shaft
- Carbon tail boom for use with Thunder Tiger 710mm blades
- Carbon tail boom supports
- Main tank holds 550cc of fuel
- Header tank included for consistent engine runs
- Colorful decal scheme that is easy to see both on the ground and in the air
|
Accessories Needed:
- Radio Set - Transmitter (6 or more channels), High Speed/Torque Servo x5, Receiver, Battery,
Switch Harness, Gyro.
- Engine - Heli engine (90 size), Glow Plug, Glow Fuel (15% - 30%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Extended 6mm Hex (starting tool), Remote Glow Plug Extension Glow Plug Wrench, Foam, Rubber Band.
|
|